Screw compressors D-series
Screw compressor D-Series with direct drive 1:1
Specifications
| Article | 11300062 |
| Model | D-3010 |
| Drive power (kW) | 30 |
| Max. operating pressure (bar) | 10 |
| Max. volume flow* (m³/min) | 4.5 |
| Nominal voltage (phase/V/Hz) | 3/380-420/50 |
| Sound pressure level** dB(A) | 70 |
| Threaded connection | 1-1/4" |
| Length L (mm) | 1400 |
| Width D (mm) | 1000 |
| Height H (mm) | 1500 |
| Weight (kg) | 725 |
* Measured according to ISO 1217
** Measured according to ISO 3744
6.930,00 €
Net, VAT-free shipment
D-Series are oil filled screw compressors designed for smooth and economical production of compressed air in industrial plants. They feature a compact, logically laid-out design and are simple to use.
Features
D-Series compressors have been developed to offer an optimal balance between performance, energy saving solutions, and offer increased servicing intervals to reduce your running costs. D-Series compressors are most efficient in class.
- Modern, energy-efficient air-end.
- Microprocessor controlled for optimal cost-effective compressor operation.
- Through intelligent design of all key components, internal pressure losses are kept to a minimum, resulting in noticeable savings in total energy consumption.
- Through the use of an effective oil separation system, a residual oil content in compressed air of maximum 3 mg/m2 is attained.
- i-Log controller for more setting and control options a group mode control via several i-Log controllers and connection to a higher-level master controller or a control room via MODBUS.
- All filters and separators are easy to reach for economical service.
Professional controller
The controller i-Log controls operation
of the compressor in automatic mode, and also provides the user with necessary information on the working pressure, temperature of the air oil mixture, compressor operation time, etc.
Reliable electric motor
D-Series compressors are fitted with quality electric motors with a high efficiency coefficient and world-class bearings from leading manufacturers. The motors are not overloaded, but have a power reserve and overheat protection for windings.
Screw air-end
The screw block features a contemporary and energy-efficient rotor design. As the pair of screws rotates, the oil under the excess pressure forms a thin oil film between the rotating bodies. This ensures contactless rotation and the associated longevity.
Separation system
D-Series compressors are fitted with an effective three-phase separation system. Most of the oil is separated under centrifugal force in the separator tank. Some of the oil is separated by gravitational force during movement of oil inside the separator. The remaining amount of oil is separated by a quality separation element. The total amount of oil in compressed air at the outlet of the compressor does not exceed 3 mg/m3.
Diese Produkte könnten Sie interessieren:
Article14400304
Adsorption dryer ADX-F-PDP with pressure dew point control and pre-installed pre- and post-filters, dew point down to max. -40°C
view details
Int/En
