Int/EnSelect countrySelect language
0
0,00
€Int/En
Specifications
| Article | 11300035 |
| Model | DV-1508 |
| Drive power (kW) | 15 |
| Max. operating pressure (bar) | 8 |
| Max. volume flow* (m³/min) | 2.3 |
| Nominal voltage (phase/V/Hz) | 3/380-420/50 |
| Sound pressure level** dB(A) | 69 |
| Threaded connection | 1/2" |
| Length L (mm) | 1190 |
| Width D (mm) | 810 |
| Height H (mm) | 1280 |
| Weight (kg) | 445 |
* Measured according to ISO 1217
** Measured according to ISO 3744
   |
|
DV-Series rotary screw oil-filled compressors feature high performance, reliability and efficiency. The screw unit has a direct one-to-one connection to the motor through a coupling and transfers the torque without loss, increasing the energy efficiency of the compressor in comparison with a belt or gear drive.
Features
Comprag DV-Series compressors are noise-and vibration-insulated and can be installed in any industrial premises in close proximity to the consumer. This eliminates the need to install costly noise insulation and to run long compressed air lines, thereby reducing pressure losses and increasing system efficiency.
DV-series frequency control
A plant's demand for compressed air varies throughout the day - from zero demand to peak demand.
Conventional screw compressors are not able to switch between operating modes according to a plant's current demand for compressed air. Owing to constant switching between loading/unloading modes or the idle running of compressors, conventional screw compressors consume consistently large amounts of electrical energy when operating.
The Comprag DV compressor series with frequency control has been created for economical compressor operation where there is varying demand.
DV compressors are provided with a frequency converter for continuous control of compressor output according to the current demand for compressed air. They provide a plant with the necessary amount of compressed air at a given moment and at a constant set pressure, while consuming only as much electrical energy as there is demand for compressed air. This mode of operation conserves as much energy as possible.
Comprag compressors with frequency control allow a 25% saving in electrical energy consumption.
Mechanism of compressor with frequency control:
Varying compressed-air demand involves a change in pressure in a plant's compressed-air system. A pressure sensor installed in the compressor brings about a change in system pressure by means of a corresponding signal sent to the compressor's controller. Via the frequency converter, the controller sets a speed for the electric motor to match the compressor's required output. In this way, the plant's compressed-air system pressure is kept at a constant value.
The frequency converter means that compressor start-up is associated with very low starting currents. This has a positive effect on the service life of the electrical motor and the electrics.
Diese Produkte könnten Sie interessieren:
