Process Water/Oil Separator WOS-Serie

Process Water/Oil Separator WOS
capacity up to 3,0 m3/min

Specifications

Model WOS-1 WOS-3
Air flow* (m3/min) 1 3
Length L (mm) 475 810
Width W (mm) 106 106
Height H (mm) 133 133
Weight (kg) 1,6 2,0

* Measured according to ISO 7183

WOS Series Process Condensate Separators are used to separate oils and other impurities from the water in the condensate lines. WOS separators efficiently separate oil through a multi-stage separation process.

Why a process oil/condensate separator?

Air contains water vapor and atmospheric impurities, which, in the compression process, pass through the screw compressor unit. Air is mixed with the compressor oil needed for lubrication and cooling of the unit. After the compression process air is cooled in a compressor aftercooler, refrigeration dryer, etc. In the process of cooling the water vapor condenses, along with most of the impurities in the compressed air, including oil. Environmental regulations govern the degree of contamination of condensate discharge to sewer. WOS Process Condensate Separators are designed to separate oil and further impurities from the condensate. These contaminants can then be recycled. By using an advanced multi-stage separation process, WOS Separators are able to effectively separate the from the air-line condensate.

Features

  • No power supply needed - works without electricity
  • Reliable construction with no moving parts
  • Easy to install, operate and maintain

Downloads

Catalogue
Download
Catalogue
Download
User manual
Download
© 2002-2021 All rights reserved
Comprag®, Contracor® - registered trademarks
Positive displacement™, Corrosion control™ - trademarks