Refrigerated dryers RDX-serie
capacity up to 7,7 m3/min
Specifications
| Model | RDX-52 | RDX-65 | RDX-77 |
| Air flow* (m3/min) | 5,2 | 6,5 | 7,7 |
| Max. working pressure (bar) | 14 | 14 | 14 |
| Screw connection | 1 1/2" | 1 1/2" | 1 1/2" |
| Rated voltage (Phase/V/Hz) | 1/230/50 | 1/230/50 | 1/230/50 |
| Drive power (kW) | 1,0 | 1,1 | 1,5 |
| Length L (mm) | 565 | 565 | 565 |
| Width W (mm) | 515 | 515 | 515 |
| Height H (mm) | 890 | 890 | 890 |
| Weight (kg) | 75 | 75 | 86 |
* Measured according to ISO 1217
   |
|
RDX-series refrigerated dryers with a capacity of 0.4-36.0 m3/min are equipped with an efficient cast-aluminium heat exchanger and an inbuilt coalescence separator. The low degree of pressure loss due to the inbuilt separator and the reliable outer insulation of the heat exchanger facilitate a high level of energy efficiency for the system. The coalescence separator is insensitive to pressure fluctuations in the case of varying load and reliably removes up to 98% of condensed moisture.
Features
- Operation and failure LED indication
- Dew point indicator with a colour scale
- Hot-gas bypass regulation for an adjustment of refrigeration capacity
- Reliable drain valve and electronic timer to control periodic operation
- Environmentally and ozone-friendly refrigerants R134a and R404a
- Efficient thermally insulated heat exchanger
- Modern and reliable refrigerant compressors
Adjusting dryer's capacity for different operating conditions
For complete drying of compressed air, it is necessary to use refrigerated dryers. RDX series dehumidifiers are a robust design with low pressure loss and high efficiency.
The capacity applies to a working pressure of 7 bar, a compressed air temperature at the dryer's inlet of 35°C and an ambient temperature of 25°C, according to DIN ISO 7183. In order to calculate the dryer's capacity for real operating conditions at the dryer's inlet, please use the following correction coefficients:
Capacity(air compressor) x F1 x F2 x F3 = Capacity(dryer).
Example:
For an air compressor capacity of 1.6 m3/min, a working pressure of 4 bar, a compressed air temperature at the dryer's inlet of 45°C and an ambient temperature of 35°C, the required capacity of the refrigerated dryer is calculated as follows:
Capacity (dryer) = 1.6 x 1.25 x 1.39 x 1.14 = 3.169 m3/min.
