Screw compressors F-Serie
Screw compressors F-Serie with belt drive
capacity up to 14,7 m3/min
capacity up to 14,7 m3/min
Specifications
| Model | F-75 | F-90 |
| Drive power (kW) | 75,0 | 90,0 |
| Working pressure (bar) | 8 / 10 / 13 | 8 / 10 / 13 |
| Max. capacity* (m3/min) | 12,4 / 10,8 / 9,2 | 14,7 / 12,8 / 11,1 |
| Rated voltage (Phase/V/Hz) | 3/380-420/50 | 3/380-420/50 |
| Sound pressure level** dB(A) | 75 | 75 |
| Screw connection | 2" | 2" |
| Length L (mm) | 1960 | 1960 |
| Width W (mm) | 1490 | 1490 |
| Height H (mm) | 1790 | 1790 |
| Weight (kg) | 1520 | 1620 |
* Measured according to ISO 1217
** Measured according to ISO 3744
   |
|
Comparg F-Series are oil filled screw compressors designed for smooth and economical production of compressed air in industrial plants. They feature a compact, logically laid-out design and are simple to use.
Features
Up to 94% of the electric energy expended in driving a compressor may be used again in the form of recuperated heat. F-Series compressors allow heated air to be used efficiently by recovering it for production or storage facilities. 100% - electric energy consumed by compressor. 4% - residual heat in compressed air. 2% - loss to heat radiation.
- Modern, energy-saving screw block design.
- Optimum compressor operation thanks to microprocessor control.
- i-Log controller with advanced configuration and management capabilities, with built-in master-slave function and RS485 interface.
- Minimal pressure loss across all key compressor components results in tangible total energy savings.
- Efficient oil separation system with a residual oil content of less than 3 mg/m3 in the compressed air.
- Free access to filters and separators for service.
Professional controller
The t-Log controller controls the operation of the compressor in automatic mode, and also provides the user with the necessary information about the working pressure, the temperature of the air-oil mixture, the operating time of the compressor, etc.
Reliable electric motor
F-Series compressors are equipped with quality motors that have a high efficiency coefficient and bearings from leading manufacturers. The motors are not overloaded and have an energy reserve and thermal motor protection.
Screw air-end
The screw block features a contemporary and energy-efficient rotor design. As the pair of screws rotates, the oil under the excess pressure forms a thin oil film between the rotating bodies. This ensures contactless rotation and the associated longevity.
Separation system
Comprag compressors are fitted with an effective three-phase separation system. Most of the oil is separated under centrifugal force in the separator tank. Some of the oil is separated by gravitational force during movement of oil inside the separator. The remaining amount of oil is separated by a quality separation element. The total amount of oil in compressed air at the outlet of the compressor does not exceed 3 mg/m3.
