Comparg A-Series
Screw compressors
Screw Compressors Comparg A-Series are designed for smooth and economical production of compressed air.
Air flow rate 1,0 — 14,8 m3/min.
Pressure range 8,0 - 13,0 bar.
Comprag's products are sold in
more than 50 countries worldwide
via a professional distribution network.

Products application information
01. Compressed air producing
Screw Compressors A-Series
Capacity to 2,3 m3/min
Capacity to 2,3 m3/min with dryer
Capacity to 3,6 m3/min
Capacity to 3,6 m3/min with dryer
Capacity to 5,9 m3/min
Capacity to 8,7 m3/min
Capacity to 14,8 m3/min
02. Compressed air preparation
Refrigerated dryers RDX
Adsorption dryers ADX
Air Filters for compressed air lines AF
Cyclone Separators for compressed air lines AS
Portable moisture extraction systems MEX
Portable compressed air aftercoolers ACP/ACE
Portable high volume coalescent filters CK
03. Compressed air storage
Air Receivers RV
04. Moisture management
Timed Solenoid Drain Valve TD
Mechanical Float Drain Valve FD
Process Water/Oil Separator WOS
05. Special products
Lubricant for Screw Compressors ScrewLub
Screw Compressors Comparg A-Series with capacity to 2,3 m3/min
Screw Compressors Comparg A-Series with capacity up to 2.3 m3/min

Comparg A-Series are oil filled screw compressors designed for smooth and economical production of compressed air in industrial plants. They feature a compact, logically laid-out design, high quality materials and workmanship, using key components from leading manufacturers.

Features

  • Modern, energy-efficient air-end.
  • Microprocessor controlled for optimal cost-effective compressor operation.
  • Through intelligent design of all key components, internal pressure losses are kept to a minimum, resulting in noticeable savings in total energy consumption.
  • Through the use of an effective oil separation system, a residual oil content in compressed air of maximum 3 mg/m3 is attained.
  • All filters and separators are easy to reach for economical service.
Energy consumption in the production of compressed air - keeping your running costs low
 

 

Screw compressors offer significant energy savings in the 7.5 kW to 15 kW motor power range of compressors when compared to piston compressors.

For the same electrical power consumption, the specific cost per cubic meter of compressed air is significantly lower when using Comparg A-Series compressors.

Output (m3/min)
Power (kW)
Comparg A-Series compressors
Piston compressors
Catalog Comparg A-Series 7.5 - 15 kW (9383 kB, Pdf document) - Download
User Manual Comparg A-Series 7.5 - 15 kW (13718 kB, Pdf document) - Download

Table of Models

Article Model Drive power (kW) Max. working pressure (bar) Capacity* (m3/min) Rated voltage (Phase/V/Hz) Sound pressure level** dB(A) Air receiver capacity (liter) Screw connection
11100011 A-0708 7,5 8 1,10 3/380/50 65 - 1/2"
11100012 A-0710 10 0,90
11100013 A-0713 13 0,60
11100015 AR-0708-270 7,5 8 1,10 3/380/50 65 270 1/2"
11100018 AR-0708-500 500
11100016 AR-0710-270 7,5 10 0,80 3/380/50 65 270 1/2"
11100019 AR-0710-500 500
11100021 A-1108 11,0 8 1,60 3/380/50 67 - 1/2"
11100022 A-1110 10 1,40
11100023 A-1113 13 1,30
11100025 AR-1108-270 11,0 8 1,60 3/380/50 67 270 1/2"
11100028 AR-1108-500 500
11100026 AR-1110-270 11,0 10 1,40 3/380/50 67 270 1/2"
11100029 AR-1110-500 500
11100031 A-1508 15,0 8 2,30 3/380/50 69 - 1/2"
11100032 A-1510 10 1,90
11100033 A-1513 13 1,50
11100035 AR-1508-270 15,0 8 2,30 3/380/50 69 270 1/2"
11100038 AR-1508-500 500
11100036 AR-1510-270 15,0 10 1,80 3/380/50 69 270 1/2"
11100039 AR-1510-500 500

* Measured according to ISO 1217
** Measured according to ISO 3744

Copyright © 2002-2019. All rights reserved.
Comprag®, Contracor® - registered trademarks
Positive displacement™, Corrosion control™ - trademarks

Visit
CONTRACOR.de